Laney Tony Iommi TI100 Retube Kits
Price range: $263.00 through $418.00
Full Retube Kits for the Laney Tony Iommi TI100 Amps
The Laney Tony Iommi TI100 Retube Kits.
All of our Laney TI100 full Retube Kits are designed specifically for these amps. Every kit is configured to provide a specific sound/experience.
The default power tubes for all of our Laney TI100 kits are the JJ 6L6GC’s. The JJ 6L6GC tubes follow the classic 6L6GC sonic archetype with big lows, smooth mids and crystalline highs. What sets them apart is their low end clarity, mid-range detail and very clear highs without being overbearing or harsh. The JJ 5881’s are a Classic 23 watt 5881 in a traditional stubby bottle. “Jangle” for days and a very warm full tone. Right in-between the JJ 6L6GC and the JJ 6V6S in power. If you’re looking for that early-breakup “tweed” era character these are it.
These amps are also compatible with EL34 type tubes and here are your options. Thru the years the JJ E34L’s with their added punch and articulation have become a favorite here at Eurotubes and with our customers. They are very tight with an extended low end over a standard EL34. However you can use the Power Tube drop down to select the JJ EL34’s, the JJ EL34II’s, the JJ KT77’s or the JJ 6CA7’s. The JJ EL34’s are known for their mid range bloom and have a slightly looser feel when compared to the E34L’s. The JJ EL34II’s are not as aggressive as the E34L, but they are a little fuller in the lows and low mids than the EL34’s. The JJ KT77’s have an extended frequency response with big/chunky lows (even deeper than the E34L’s) and chimey/present highs. The mids are very smooth for an EL34 type tube and when driven they’re extremely rich and complex. The JJ Big Bottle 6CA7’s have big lows (on par with the KT77’s), an emphasis in the lows mids, and very round/natural highs. This gives the tube a very thick and round character that’s as close to crossing a standard EL34 with a 6L6 as you can get.
These are all adjustable bias amps and all you need to check and adjust the bias is a multimeter because there are test points on the amp. Or you can use a bias probe and a Multimeter, or our all-in-one Eurotubes “Pro One” bias probe that reads both the plate current and the plate voltage simultaneously.
The Standard Retube Kit is very close to OEM. The kit includes one matched quad of JJ 6L6GC’s by default, one Balanced JJ ECC83S for the phase inverter (V8, in the back row farthest from the input jack), and seven Standard JJ ECC83S’s for V1 thru V7.
The Gold Pin Retube Kit uses the JJ ECC83S Gold Pin variants to provide a smoother, creamier, and more singing overall sound. This option is less aggressive and has less “teeth” when driven hard. If you like a classic raunchy gritty overdriven tone, we recommend looking to the Standard or High Gain option. If sweet, open, and more refined is what you’re after this kit will do it. The kit includes one matched quad of JJ 6L6GC’s by default, one Balanced JJ ECC83S Gold Pin for the phase inverter (V8, in the back row farthest from the input jack), and seven Standard JJ Gold Pin ECC83S’s for V1 thru V7.
The High Gain Retube Kit uses our hand picked high gain selected JJ ECC83S’s. If you’re looking for maximum crunch and grind this is where you want to be. Sonically this setup is very similar to our Standard Retube Kit but with a little extra gain on tap. The kit includes one matched quad of JJ 6L6GC’s by default, one Balanced High Gain JJ ECC83S for the phase inverter (V8, in the back row farthest from the input jack), and seven Handpicked High Gain JJ ECC83S’s for V1 thru V7.
The ECC803S V1 Option Retube Kit uses the Long Plate JJ ECC803S in the V1 position. The JJ Long Plate ECC803S has a little lower gain with big thick mids and a little more sparkle in the highs. The kit includes one matched quad of JJ 6L6GC’s by default, one Balanced JJ ECC83S for the phase inverter (V8, in the back row farthest from the input jack), six Standard JJ ECC83S’s for V2 thru V7 and one Standard JJ ECC803S for V1 (closest to input jack).
The Gold Pin ECC803S V1 Retube Kit uses the Gold Pin tubes for a smoother richer tone. The kit includes one matched quad of JJ 6L6GC’s by default, one Balanced Gold Pin JJ ECC83S for the phase inverter (V8, in the back row farthest from the input jack), six Standard Gold Pin JJ ECC83S’s for V2 thru V7 and one Standard Long Plate Gold Pin JJ ECC803S for V1 (closest to input jack).