Cart contains {{shoppingcart.totalQuantity}} Item(s) Total: {{shoppingcart.subtotal}} {{shoppingcart.total}}

Budda Superdrive V20 SRV Option

Our Products: Full Retube™ kits for Guitar Amps > Retube™ Kits For Budda > Budda Superdrive Series II V20

Price: $134.50

Budda Superdrive V20 SRV Option

Product Details

It's no secret that Stevie played his amps cranked and preferred a little cleaner sound from the front end allowing you to hear more power tube breakup. Well, this works really well with the Budda Superdrive amps too! This kit uses a JJ 5751 for V1 which is in-between an ECC81 and an ECC83S in gain, two ECC83S's one being current balanced for the phase inverter in V3 along with a JJ 5U4GB rectifier tube and a matched pair of JJ 6V6S's for power.

The Balanced ECC83S is located in V3 closest to the power tubes and the 5751 is located in V1.

Combo amps are very hard on tubes because of vibrations which can cause tube rattle with any brand of tube. If your amp is the combo version and you play by yourself in a quiet environment or record with your amp you may want to consider using the EuroDamper tube damper rings for the two 6V6S’s and the 5U4GB. These are available in the "Related Products” tab as a set of three large dampers and will greatly decrease tube rattle.

These amps are cathode biased, there is no bias adjustment to be made.

Related Products...

Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. (

) indicates a required accessory.

EuroDamper Large - Set of Three

Price $15.00

Eurotubes 10 Gauge 3 foot Speaker Cable

Price $33.00

Eurotubes 10 Gauge 6 foot Speaker Cable

Price $42.00

© 1998 - 2014 Eurotubes Inc. All Rights Reserved
All text and images on this website may not be used without express permission.
All prices and product information subject to change without notice.