f Find us on Facebook Home Shop Online Product Info Amp Info Bias Info FAQ "+" Reviews About ET
Carvin X60B 6L6 Standard Retube
Price: $120.00
Carvin X60B 6L6 Standard Retube
Product Details

Looking for more warmth and definition? This is the Standard Retube Kit for the early X60B amps that came with 6L6's. The preamp section uses three ECC83S's with one balanced for the phase inverter in V3. The default power tubes are a matched pair of the JJ 6L6GC’s but you can configure this kit to use the JJ 5881’s by clicking on the "Customize" button! 

The Balanced ECC83S is located closest to the power tubes in V3.


Most of these amps are fixed bias but over the years many have been modded to be adjustable bias. If your amp is adjustable bias then all you need to check and adjust the bias is a Multimeter if you use the Carvin method. For more accuracy you can also use a bias probe and a Multimeter, or our all-in-one Eurotubes "Pro One" bias probe that reads both the plate current and the plate voltage simultaneously. These are available under the "Related Products" tab.



You can use our Carvin bias video for reference which we did on a V3. If you're going to use the Carvin standby switch method then between 70 to 80mA is correct.

The video below explains the difference between bias probe types.


Related Products...
Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. () indicates a required accessory.











© 1998 - 2014 Eurotubes Inc.  All Rights Reserved
All text and images on this website may not be used without express permission.
All prices and product information subject to change without notice.
A website for musicians by musicians. Home Shop Online Product Info Amp Info Bias Info FAQ "+" Reviews About ET Email Phone 5036597401 EUROTUBES
Preamp-Tubes-c2.htm